Press firmly into place making sure to imbed the plaster into gypsum or metal lath bases. ![]() Thoroughly clean pail and drill mixer before mixing another batch.Īpply California One-Kote using a hawk and trowel. Do not exceed 3 minutes of mixing time per batch and the water quantities specified above. Only mix enough material so that all the material mixed shall be used in 40 to 45 minutes at an ambient temperature of 70☏ and a relative humidity of 40☏. Material shall be mixed for 2 to 3 minutes. Add water to bring California One-Kote to a working consistency. California One-Kote shall be mixed in a clean 5 Gal. When mixing gypsum plasters, clean water and pails are critical to mixing success. Before applying Plaster-Weld, assure the surfaces are free of dust, dirt or other contaminants that may affect sealing and adhesion. ![]() Larsen’s Product Plaster-Weld (non-diluted) must be applied over the existing surface and shall be dried before the application of California One-Kote. Gypsum wallboards must be brought to a level 3-surface. Coverage at ½” applied thickness over metal lath will be reduced by 50%.ĭue to the quick setting characteristics of California One-Kote, the preparation of interior surfaces must be completed before mixing California One-Kote. meters at an applied thickness of 3/8” - over gypsum lath or wall board. May be applied to gypsum or metal lath bases.įorty-five minute open time provides enough time to get small patches done right and have a fast turn around time for finish coat or paint.Ĭan be troweled to a glass smooth surface.Ĭalifornia One-Kote may be applied over gypsum or metal lath or bonded to gypsum wall board.Ĭalifornia One-Kote will cover approximately 22 sq. ![]() Provides a fast, easy and accurate mix for interior patch work. A gypsum plaster finish may be applied over California One-Kote and the finished surface may be painted.Ĭalifornia One-Kote is packaged in 50 Lbs / 22.68 Kg bags.Ĭalifornia One-Kote is premixed, just water is required. Color may be added to California One-Kote. California One-Kote is designed for a 'one coat' application up to ¾” of an inch thick in one pass. California One-Kote is a gypsum-based, quick-setting, patching plaster for repair and renovation of gypsum plaster wall systems.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |